Long Shutter Gate Valve PN40 ACS

Description

• Safety of service: - Long flange shutter valve valve PN40 for drinking water and neutral liquids
• Powder coating epoxy RAL 5005 applied indoors and outdoors with a minimum coating thickness of 250 μm Fusion-bonded epoxy coating in accordance with DIN 3476-1, EN 14901 and GSK (RAL-GZ662)
• Epoxy coating, approved for drinking water, electrostatically applied according to DIN 3476-1

Compliance with standards:

- NF EN 1092-2: 1997: Flanges and their assemblies.

- Certification according to EN 1074-2: AENOR certified B18/000002

- Part 2: Cast iron flanges.

- NF EN 1171 (category 3).

- NF EN 12266-1 100% tested in accordance with the standard

- NF EN 12266-1, DIN 3230

- NF EN 1074 (endurance resistance of 2,500 cycles).

Approval:

- ACS (Certificate of Health Conformity).

Characteristics

• Isolation valve and or flow regulator approved for drinking water
• Complete and direct passage
• Reduced operating torque
< li>Robust design, with inner rod and fixed handwheel / Square / Reducer.
• Body and bronze wedge seat well fitted and machined to obtain a perfect surface finish, ensuring perfect sealing.
• Valves from DN40 to DN 600 are equipped with an axial bearing to guarantee reduced operating torques
• Rising stainless steel operating stem with thread obtained by the cold rolling process, which allows the steel structure to be maintained and its mechanical resistance to be increased
• Rod sealing system with 2 EPDM O-rings, with adjustable cable gland.
• Fully vulcanized cover in EPDM approved for drinking water (ACS)
• Top of the wedge designed with a "soft stop" system, which acts as an end stop, for the valve fully open< /li>
• Brass key nut, firmly anchored in the key, avoiding vibrations and ensuring greater longevity
• EPDM body/cover seal entirely housed in a cavity designed to couple it, surrounding the screws, ensuring perfect sealing
• PFA40
• Flange drilling: - ISO PN40 from DN40 to 600
• Use temperature: +0°C (Without ice) at +80°C.

Applications

• Networks water distribution systems
• Fire protection networks
• Irrigation networks

Possible options:

• Handwheel or Square
• Anti-Clockwise (FAH) or Clockwise (FSH) closing direction
• Motor plate with AUMA motor or Auma Manual Reducer