End valve Waste water

• Application for EU (other fluids on request)
• Swing with its reinforced design.
• The seal is in NBR sanitation.
• Flapper end with double seal
• Large seal in the valve cap for reduced noise level and longevity of the coating
• Service temperature from 0ºC (excluding frost) to 70ºC
• Epoxy powder coating RAL 3011 Wastewater
• Applied indoors and outdoors with a minimum wastewater coating thickness of 250 µm
< li>Fusion bonded epoxy coating in accordance with DIN 3476-1, EN 14901 and GSK (RAL-GZ662)

Features:

• Valve with automatic poppet shutter
• Full bore
• Valve opens under direct pressure to discharge fluid, allowing water to flow when pressure is released, thus preventing fluids do not return when the tide rises
• The sealing area of ​​the valve has an inclination of 8º to guarantee automatic closing after the fluid exits. This inclination allows the shutter to exert sufficient force to prevent fluid penetration in the opposite direction.
• The minimum opening pressure is 0.1 bar
• The wide joint has been sealed to reduce noise and increase the endurance of the coating
• Can be installed directly on flanges or masonry surfaces previously straightened with steel anchors before being planed.< /li>
• With flange connection dimensioned according to NF EN 1092-2, drilled according to NF EN 1092-2 | PN 10 standard; NF EN 1092-2 | PN 16 from DN 200

Sealing

• Leakage rate better than DIN 19569-4.

Option:

• On request possibility of being supplied with Handle.

< strong style="color: rgb(9, 123, 185);">Applications:

• Wastewater and industrial treatment plant.
• Water tanks rain