Hydrobar Float Constant Level Controller by Float Pilot

• The RYL Hydrobar Float valve is a 100% hydraulically operated control valve that regulates the constant level of a tank, regardless of upstream pressure variations, by means of a stainless steel proportional flow modulation pilot. Thanks to a needle valve on the chamber, the response time can be adjusted, to avoid water hammer effects during the closing phase. Normally equipped with visual position indicators, body made of ductile iron with epoxy coating and internal parts of stainless steel.
• The valve is designed to reduce pressure loss, noise and damage related to cavitation. The RYL control valve is completely modular and can be used for a wide range of applications
• Epoxy coating according to FBT technology, color blue RAL 5005.
• Internal and external application with a minimum coating thickness of 250 μm.
• Epoxy coating, approved for drinking water, electrostatically applied according to DIN 3476-1.

Compliance with standards:

• Tested according to EN 12266.
• Face-to-face dimensions ISO 5752-1. 

Approval:

• ACS (Certificate of Health Conformity). 

Information for sizing:

• Upstream, downstream pressure and flow rate are necessary for correct sizing.
• The AC anti-cavitation device is recommended for resistance against cavitation and precise regulation in low flow cases.
• A minimum length of 3 DN in upstream of the valve is recommended for better accuracy.

Pilot adjustment ranges Upstream:

• Blue spring: from 0.7 to 7 bars.
• Red spring: from 1.5 to 15 bars.
• Higher values up to 25 bars on request.
• Values below 0.7 bars available with high sensitivity drivers.

Conditions of use:

• Maximum temperature: 70°C.
• Minimum operating pressure: 0.7 bar.
• Maximum operating pressure: 25 bars.

Options:

• Linear position transmitter with mA output (RYL CSPL model).
• On-off linear position transmitter (RYL CSPO model).
• Kit pressure measurement.
• High capacity self-cleaning filter.
• Manometers not supplied (option). 
• Upstream pressure maintainer with backflow prevention.
• Upstream pressure maintainer with solenoid valve.
• Upstream pressure maintainer with high sensitivity pilot.

Applications:

• Distribution networks water
• Fire protection networks
• Irrigation networks