AQUAFLOT compensated float valve

Performance

• Balanced device,
• Progressive membrane operation and without friction avoiding any risk of mechanical blockage,
• Low pressure loss.
• epoxy paint RAL 5005
• Internal and external application with a minimum coating thickness 250 μm GSK standard
• Epoxy coating, electrostatically applied according to DIN 3476-1, EN 14901 and GSK (RAL-GZ662) specifications

Design

• Reduced space requirement to optimize tank capacity,
• HDPE float.< /li>
• Valve for use in tanks with automatic water level control function, for drinking water networks, fire protection, irrigation or building
• Float valve automatic available with HDPE or stainless steel float
• Right angle balanced design ensures smooth and reliable operation
• A balanced high strength diaphragm with direct float and lever compensates 90% of the pressure effect on the main valve, without risk of friction or adhesion
• The high reduction factor of the lever arm makes the device very insensitive to oscillations on the surface of the water
• The device is simple, robust and requires no adjustment.
• Ease of implementation
• Position of the float adjustable in the vertical plane
• li>
• Maintenance-free.

Features

• Range: DN 40 to 250.
• Flange according to EN 1092-2 PN10/16
• PFA 16.
< li>The valves are individually tested in the factory according to EN 1074-1/2 and EN 12266 standards:

- Seal 1.1 x PN (bar); Body: 1.5 x PN (bar)

• Operating temperature from 0°C (without ice) to 70°C
• Flange drilling ISO PN 10 (ISO PN 16 in special execution

for DN 200 and 250).

Options

• 316 L stainless steel float.
• Altimeter adjustment.
• Bottom installation kit reservoir.