Ball valve

• Full passage ensured by total clearance of the ball from dirty water, without clogging.
• Low pressure losses due to full passage.
• Self-cleaning ball lifted by the flow and guided to the lateral housing where it disappears completely.
• Sealing even at low pressure thanks to the elastomer-coated ball in both the horizontal and vertical directions ascending.
• Non-encrustable materials:
• Resin, aluminum or cast iron ball, NBR overmolded, according to DN.
• Cap seal: NBR.
• Body: GS cast iron
• Anti-corrosion protection: interior/exterior epoxy resin.
• Bolts: A2 stainless steel.
• Easy maintenance: Cap removable, allowing replacement of the ball.

Characteristics

• Range: DN 40 to 400 with flanges.
• PFA 16 from DN 40 to 400.
• Use temperature: -10°C to +50°C.
• Waterproofing: according to NF EN 12050-4.
• Face-to-face dimensions according to standards EN 558-1 series 48 for DN 40 to 300
• Drilling of the connection flanges according to standard EN 1092-2 and ISO 7005-2:
• ISO PN 10/16 for DN 40 to 150
• ISO PN 10 for DN 200 to 400
• ISO PN 16 for DN 200 to 400

Applications

• Remote stations discharge of wastewater and charged or viscous fluids.

Mounting types

• Horizontal,
• Vertical ascending.