COURTE PN25 series gate valves

• Safety in service: - PN25 short flange shutter valve for drinking water and neutral liquids
• Epoxy paint coating RAL 5005: Internal and external application with a minimum coating thickness of 250 μm
• Epoxy coating, approved for drinking water, applied electrostatically according to DIN 3476-1, EN 14901 and with GSK approval

Compliance with standards:

• NF EN 1092-2: 1997: Flanges and their assemblies. 
• Certification according to EN 1074-2: AENOR certified B18/000002
• Epoxy coating certification GSK-ID 1247 (RAL-GZ 662)
• Part 2: Cast iron flanges. 
• NF EN 1171 (category 3). 
• NF EN 12266-1 100% tested in accordance with standard
• NF EN 12266-1, DIN 3230
• NF EN 1074 (endurance resistance of 2,500 cycles). 

Approval:

• ACS (Certificate of Health Conformity). 

Features:

• Isolation valve approved for drinking water
• Anti-Clockwise (FAH) or Clockwise (FSH) closing
• Complete and direct passage
• Reduced operating torque
• Reduced operating torque stainless steel handle with thread obtained by the cold rolling process, which allows maintaining the steel structure and increasing its mechanical strength
• Spindle sealing system with 4 EPDM O-rings
• Allows the replacement of the spindle sealing O-rings with valve under load
• Fully vulcanized cover in EPDM approved for drinking water (ACS)
• Top of the wedge designed with a “soft stop” system, which acts as an end stop, for the valve fully open
• Brass key nut, firmly anchored in the key, avoiding vibrations and ensuring greater longevity
• Valve body and key designed with a “monorail” system
• Fully EPDM body/cover seal housed in a cavity designed to couple it, surrounding the screws, ensuring a perfect seal
• Integrated and sealed A2 stainless steel body/cover screws, ensuring total protection against corrosion
• PFA25
• Flange drilling: ISO PN25 DN40 to 300
• Use temperature: +0°C (Without ice) to +70°C. 

Applications:

• Water distribution networks
• Fire protection networks
• Irrigation networks