Support heel flange adapter Steel

• For steel pipes. 
• Ease of implementation:
• Angular deviation ± 3°,
• Alignment adjustment,
• High adjustment value,
• Passage with support heel allowing the assembly of sandwich type valves.

Reliability:

• Watertightness guaranteed by compression of a joint on the pipe when tightening a counter flange,
• Corrosion resistance: epoxy powder coating and protected bolts.

Compliance with standards:

• NF E 29 220: adapters and adjustable cuffs with flanges,
• NF EN 545: GS cast iron pipes, fittings and accessories for water pipes,
• NF EN 1092: flanges and their assemblies,
• ISO 2531: GS cast iron pipes, fittings and accessories for pressure pipes,
• ISO 7005: metal flanges, flanges cast iron,
• ISO 7483: dimensions of joints to be used with flanges according to ISO 7005.

Approval:

• Certificate of health conformity.

Note:

• This connection does not mechanically prevent the dislodging of tubes which must be anchored by other means.

Characteristics:

• Range: For steel pipes: Adapter allowing anchoring with kit DN 50 to 1600 - PFA 10 and 16 ISO PN 10 and 16
• DN 50 to 1000 - PFA 25 ISO PN 25
• DN50 to 1200 – PFA 40 ISO PN40
• (on request PN64, PN100, ASA 150, 300, 600).
• Use temperature: +0°C to +60°C.

Applications:

• Water transport and distribution.
• Pumping, treatment, storage.
• Protection networks fire.
• Irrigation networks.
• Sanitation and rainwater drainage networks (type WC-NF EN 681-1).