Search
Results : " "
Product (00)
Categories (00)
Product category code
S302
Product Description
  • Safety of service: - Long flange shutter valve valve PN64 and PN100 for drinking water and neutral liquids.
  • Epoxy powder coating applied inside and outside with a minimum coating thickness of 250 µm Fusion-bonded epoxy coating in accordance with DIN 3476-1.
  • Epoxy coating, approved for drinking water, electrostatically applied according to DIN 3476-1
  • < /ul>


    Standard compliance

    • NF EN 1092-2: 1997: Flanges and their assemblies. 
    • Certification according to EN 1074-2: AENOR certified B18/000002
    • Part 2: Cast iron flanges. 
    • NF EN 1171 (category 3). 
    • NF EN 12266-1 100% tested in accordance with standard
    • NF EN 12266-1, DIN 3230
    • NF EN 1074 (endurance resistance of 2,500 cycles). 


    Features

    • Approved isolation valve and or flow regulator, the cover and the seat are equipped with special holes or grooves which overlap during the opening process so that the regulation characteristics are guaranteed exactly according to the customer specifications.
    • Complete and direct passage, metal-to-metal seal guaranteed in both flow directions, low pressure loss.
    • X20Cr13 steel body and wedge seat well fitted and machined to obtain a perfect surface finish, ensuring perfect sealing.
    • Valves from DN50 to DN 300 are equipped with an axial bearing to guarantee reduced operating torques
    • Rising X20Cr13 steel operating rod with thread obtained by the cold rolling process, which helps maintain the steel structure and increase its mechanical resistance.
    • Rod sealing system with Graphite seals, with adjustable gland.
    • Top of the wedge designed with a "soft stop" system, which acts as an end stop, for the valve fully open
    • Brass key nut, firmly anchored in the key, avoiding vibrations and ensuring greater longevity
    • Graphite body/cover seal entirely housed in a cavity designed to couple it, surrounding the screws, ensuring a perfect sealing
    • PFA 64 or 100
    • Flange drilling: ISO PN64 and PN100 from DN50 to 600
    • Use temperature: +0°C (Without ice) at +80°C. 


    Applications

    • Water distribution networks
    • Fire protection networks
    • Irrigation networks
    • Dam


Robinet vanne à obturateur PN64 PN100 SITE
Robinet Vanne à Obturateur PN64 PN100 2
Certificate
picto-certificat1.png
RYL quality
garantie-de-qualite-–-2-(3).png
Join our community by sharing your email address below and stay informed in real time.