LUG Cast Iron Center Butterfly Faucet By Handwheel

• Epoxy paint coating:
• Internal and external application with a minimum coating thickness of 250 μm GSK
• Anti-corrosion protection provided by an integral epoxy coating and by full body coverage by the cuff.
• Flange gaskets incorporated into the cuff: no additional gaskets required.
• Flexible installation: the valve can be installed between two flanges or at the end line, bidirectional installation.
• Actuation: upper connection plate according to standard ISO 5211. The flange allows the use of different types of actuators.
• Interchangeable sleeve.
• Wide variety of applications, including drinking water and industrial applications, thanks to the numerous materials available.
• Reduced operating torques.
• Easier maintenance with reduced costs.
• Sealing according to EN12266-1 - A. (total sealing).
• ISO 5211 base for actuator mounting.
• Axis in one piece.
• Disc-axle connection with hook from DN350.
• Cast iron disk< /li>
• Flying gear reducer

Compliance with standards

• NF EN 1092-2: 1997: Flanges and their assemblies.
• Epoxy coating certification GSK-ID 1247 (RAL-GZ 662)
• Part 2: Cast iron flanges.
• NF EN 1171 (category 3).
• NF EN 12266-1 100% tested in accordance with standard
• NF EN 12266-1 , DIN 3230

Approval

• ACS (Certificate of Sanitary Conformity).

Features

• Design following EN593 and EN1074-2
• Face-to-face according to EN 558 series 20.
• Nominal pressure (PN): PN10/PN16
• Operating temperature:
• Standard up to 50°C. Other possibilities depending on choice of materials.