Faucet Gate valve Wastewater Long PN10/16

• Safety of service: - Long flange shutter valve valve PN10/16 for wastewater
• Epoxy paint coating Wastewater RAL 3011
• Internal and external application with a minimum coating thickness of 250 μm GSK standards
• Epoxy coating, approved for Wastewater, electrostatically applied according to DIN 3476-1, EN 14901 and with GSK approval

Compliance with standards:

• NF EN 1092-2: 1997: Flanges and their assemblies. 
• Certification according to EN 1074-2: AENOR certified B18/000002
• Epoxy coating certification GSK-ID 1247 (RAL-GZ 662)
• Part 2: Cast iron flanges. 
• NF EN 1171 (category 3). 
• NF EN 12266-1 100% tested in accordance with standard
• NF EN 12266-1, DIN 3230
• NF EN 1074 (endurance resistance of 2,500 cycles). 
• NF EN ISO 12944-4

Features:

• Isolation valve approved for waste water
• Complete and direct passage
• FAH or FSH < /li>
• Reduced operating torque
• The valves from DN 250 to DN 600 are equipped with an axial bearing to guarantee reduced operating torques
• Operating stem in 316L stainless steel with thread obtained by the cold rolling process, which allows maintain the steel structure and increase its mechanical strength
• Spindle sealing system with POM socket with 4 O-rings and a bottom seal NBR
• Allows the replacement of the spindle sealing O-rings with valve under load
• Fully vulcanized NBR cover
• Top of the wedge designed with a "soft stop" system, which acts as an end stop, for the valve fully open
• Brass key nut, firmly anchored in the key, avoiding vibrations and ensuring greater longevity
• Valve body and key designed with a “monorail” system
• NBR body/cover seal entirely housed in a cavity designed to couple it, surrounding the screws, ensuring watertightness perfect
• Integrated and sealed A2 stainless steel body/cover screws, ensuring total protection against corrosion
• PFA16
• Closing direction: FAH or FSH
• Flange drilling: ISO PN10/16 from DN40 to 150 – PN10 or 16 from DN200 to 500
• Use temperature: +0°C (Without ice) at +70°C. 

Applications: